Microwave-assisted ethylene–alkyne cross-metathesis: synthesis of chiral 2-(N-1-acetyl-1-arylmethyl)-1,3-butadienes

Chiral 1-arylpropargyl amides, which are resistant to undergoing ethylene–alkyne cross-metathesis at atmospheric pressure, were reacted under microwave irradiation to afford enantiomerically enriched 2-(N-1-acetyl-1-arylmethyl)-1,3-butadienes within a few minutes. Enantiomerically enriched amides underwent ethylene–alkyne cross-metathesis with retention of configuration at the propargylic/allylic position. A series of chiral 2-(N-1-acetyl-1-arylmethyl)-1,3-butadienes were synthesised with ee ⩾95%; these latter compounds could be used as building blocks for the synthesis of new antifungal and antiaromatase agents.     

Diphenyltin(IV) complexes of the 2-quinolinecarboxaldehyde Schiff bases of S-methyl- and S-benzyldithiocarbazate (Hqaldsme and Hqaldsbz): X-ray crystal structures of Hqaldsme and two conformers of its diphenyltin(IV) complex

New organometallic tin(IV) complexes of the empirical formula Sn(NNS)Ph₂Cl (NNS = anionic forms of the 2-quinolinecarboxaldehyde Schiff bases of S-methyl- and S-benzyldithiocarbazate) have been prepared and characterized by IR, electronic, ¹H NMR and ES mass spectroscopic techniques. The molecular structures of the 2-quinolinecarboxaldehyde Schiff base of S-methyldithiocarbazate (Hqaldsme) and its diphenyltin(IV) complex, Sn(qaldsme)Ph₂Cl, have been determined by X-ray diffraction. In the solid state, the ligand remains as the thione tautomer in which the dithiocarbazate chain adopts an E,E configuration and is almost coplanar with the quinoline ring. The Sn(qaldsme)Ph₂Cl complex crystallizes in two distinctly different conformationally isomeric forms, each having the same space group but different lattice parameters. X-ray analysis shows that in each polymorph, the tin atom adopts a distorted octahedral geometry with the Schiff base coordinated to it as a uninegatively charged tridentate chelating agent via the quinoline nitrogen atom, the azomethine nitrogen atom and the thiolate sulfur atom. The two phenyl groups occupy axial positions and the chloride ligand occupies the sixth coordination position of the tin atom. The deprotonated ligand adopts an E,E,Z configuration in the complex.     

Microcalorimetry, energetics and binding studies of DNA-dimethyltin dichloride complexes

The interaction of dimethyltin dichloride (Me₂SnCl₂) with calf thymus DNA was studied at 27 °C, pH 7.6 using various techniques including isothermal titration calorimetry (ITC) and UV-Vis, fluorescence and IR spectrophotometries. The binding isotherm and enthalpy curve for Me₂SnCl₂-DNA interaction was a biphasic transition process. This was determined by the analysis of the binding data with the Hill equation. The first phase of the enthalpy curve (exothermic process) was consistent with the first set of binding site, the second phase (endothermic process, less exothermicity) was consistent with second set of binding site from the cited interactions. Our results showed that the first set of binding sites is occupied by one mole of ligand bound per near 1 base pair of DNA. The DNA-ethidium bromide (EB) complex, in the presence of Me₂SnCl₂, caused the quenching of the fluorescence emission. The Scatchard plots illustrated a non-intercalating manner for such quenching. The DNA-EB complex results indicated that the binding of Me₂SnCl₂ is with the phosphate groups of DNA at low ligand concentrations (<9 mM). This was confirmed with the IR spectrophotometric spectra. However, the binding at higher ligand concentrations (>9 mM) was with the base groups of DNA. Therefore, these results suggest that the Me₂SnCl₂ binding to DNA at low concentrations occurs through an outside interaction by an exothermic process. However, the partial unfolding of the DNA caused at higher concentrations of Me₂SnCl₂ is through an endothermic process involving interactions with the base groups.     

The mechanism of formation of volatile hydrides by tetrahydroborate(III) derivatization: A mass spectrometric study performed with deuterium labeled reagents

In order to clarify the mechanism of hydride formation, the isotopic composition of arsine, stibine, bismuthine, germane, stannane and hydrogen selenide formed by derivatization with either NaBD₄ (TDB) or NaBH₄ (THB) with inorganic As(III), Sb(III), Bi(III), Ge(IV), Sn(IV) and Se(IV) in aqueous reaction media and under various reaction conditions was determined. Batch hydride generation and gas chromatography–mass spectrometry (GC–MS) were employed. The analyte, present in 0.5–5 ml of acid solution (0.1–10 M in HCl or HNO₃ or HClO₄) was derivatized with 1 ml of 0.25–0.5 M TDB / THB in 0.1 M NaOH solution. For TDB derivatization in H₂O reaction media, almost pure BiD₃ and SbD₃ were always obtained for Bi(III) and Sb(III). Nearly pure AsD₃ could be obtained only under some reaction conditions. In general, for As(III), the isotopic composition of the arsines depends strongly on reaction conditions and included all possible AsH_nD_3−n from almost pure AsD₃ to almost pure AsH₃. For Ge(IV) and Sn(IV), the isotopic composition of generated GeH_nD_4−n and SnH_nD_4−n depends on reaction conditions, but pure GeD₄ and SnD₄ could never be obtained. Pure H₂Se was obtained in all cases, independent of reaction conditions. The occurrence of side reactions involving D–H exchange in TBD during its hydrolysis and before the derivatization step, as well as on recently formed hydrides following derivatization was investigated. D–H exchange in TDB during acid hydrolysis appears to occur to a limited extent. Amongst the hydrides, H₂Se undergoes H–D exchange whereas germane and stannane do not exchange at all. Arsine undergoes D–H exchange at elevated acidities (pH < 0) whereas stibine and bismuthine do not exchange significantly during the generation and stripping steps.A reaction model for hydride generation is proposed accounting for primary reactions giving rise to hydride formation through reaction intermediates, as well as side reactions involving D–H exchange and decomposition of reactive hydroboron species, reaction intermediates and final products. Hydrides are formed by direct hydrogen transfer from boron to the analyte atom, most likely through concerted mechanisms taking place via reaction intermediates.     

Resolved torsional splitting in the ν18 and ν19- bands of propene

FT-jet spectra of propene were recorded at 0.005 cm⁻¹ instrumental resolution around 950 cm^-1. Thanks to the jet conditions, probably corresponding to T_rot close to 80 K, the torsion degrees of freedom are efficiently cooled down and the fine structure of the ν₁₈ and ν₁₉ vibrational bands could be investigated. The bands are perturbed and approximate variation of the principal rotational constants are obtained, as well as band origins. The A/E torsional splitting appears totally unpredictable over the range of vibrational-torsional energy investigated.     

Copper-catalyzed N-arylation of diazoles with aryl bromides using KF/Al2O3: an improved protocol

Copper-catalyzed N-arylation of diazoles can be accomplished using air-stable CuI as a copper source and 1,10-phenanthroline in the presence of KF/Al₂O₃ as a base. This is a simple and efficient method for the coupling of aryl bromide with diazoles. Different functionalized aryl bromides were coupled with diazoles using this system.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Processing and Properties of Nanofibrous Bacterial Cellulose-Containing Polymer Composites: A Review of Recent Advances for Biomedical Applications

Abstract

Bacterial cellulose (BC) is an extracellular natural polymer produced by many microorganisms and its properties could be tailored via specific fabrication methods and culture conditions. There is a growing interest in BC derived materials due to the main features of BC such as porous fibrous structure, high crystallinity, impressive physico-mechanical properties, and high water content. However, pristine BC lacks some features, limiting its practical use in varied applications. Thus, fabrication of BC composites has been attempted to overcome these constraints. This review article overviews most recent advance in the development of BC composites and their potential in biomedicine including wound dressing, tissue engineering scaffolds, and drug delivery. Special emphasis is placed on the fabrication and applications of BC-containing nanofibrous composites for biomedical usage. It summarizes electrospinning of BC-based nanofibers and their surface modification with an outline on challenges and future perspective.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Facile protection of carbonyl compounds as oxathiolanes and transoxathioacetalization of oxyacetals promoted by iron(III) trifluoroacetate or trifluoromethanesulfonate as chemoselective and recyclable catalysts

Oxathioacetalization of carbonyl compounds and transoxathioacetalization of O,O-acetals/ketals are reported under nearly neutral conditions promoted by iron(III) trifluoroacetate [Fe(CF₃CO₂)₃] or trifluoromethanesulfonate [Fe(CF₃SO₃)₃] as recyclable and highly efficient Lewis acid catalysts.